Step 1

Turn off your printer.

Step 2

At the back of the printer, use the tip of a pen to press and hold the Network Reset button.

Step 3

While holding the Network Reset button, turn on the printer. Continue to hold the Network Reset button.

Step 4

After 5 seconds, a network detail sheet will be printed out. Release the Network Reset button.

Step 5

On the network detail sheet, the IP address reflected should be 192.168.192.168. This is the factory-reset IP address of your printer.

Step 1

On the iPad, navigate to "Settings" > "Wi-Fi".

Step 2

Tap the circular blue ( i ) button next to your selected Wi-Fi network.

Step 3

Under "IPV4 ADDRESS", copy the IP address. This is your iPad's IP address and you will need it in Step 5 and when configuring the printer.

Step 4

Click into "Configure IP" and switch from "Automatic" to "Manual". Tap "Save".

Step 5

While your IP is on "Manual", change the iPad's IP Address, Subnet Mask, and Router to match the below:
​

Step 1

Open up the Safari browser on your iPad and search for 192.168.192.168 in the URL search bar. A configuration page will appear.

Step 2

On the configuration page, navigate to "Configuration" > "TCP/IP". Change the setting to match the below:

Step 3

Tap on the "Submit" button.

Step 4

Repeatedly tap on the "Reset" button until the printer makes a 'click' sound. Turn off and turn on the printer.

Step 5

On the iPad, navigate to "Settings" > "Wi-Fi". Tap the circular blue ( i ) button next to your selected WiFi network. Under "IPV4 ADDRESS", click into "Configure IP" and switch from "Manual" to "Automatic". Tap "Save".

Step 1

Log in to the Oddle Register App with your employee account.

Step 2

Click on the Gear icon at the bottom-left corner of the Oddle Register screen.

Step 3

Under "Printer Settings", click on "Setup Thermal Printer". Choose your printer's IP address > select "Epson" > select preferred language.

At this step, please ensure that your Oddle Register app has local network settings enabled. This will help the app discover and connect to devices (such as your printer) on the networks you use. If are unable to see your printer's IP address, navigate to your iPad's "Settings" > "Oddle Register" > "Local Network". Enable this toggle.

If your menu items consist of Chinese characters (or a combination of English words and Chinese characters), please select "Chinese (Simplified)" or "Chinese (Traditional)" where appropriate.

Step 4 (Optional)

If you would like to pair a second printer with your Oddle Register (i.e. printer for your kitchen), click on "Setup Kitchen Printer". Choose your kitchen printer's IP address > select "Epson" > select preferred language.

Step 5 (Optional)

If you would like the receipts of newly submitted orders to print automatically, click on the Gear icon at the bottom-left corner of your Oddle Register screen. Scroll to the Auto Print Settings and enable this toggle.

Auto-printing will only work for the second printer if both printers' IP addresses are connected under "Setup Thermal Printer" and "Setup Kitchen Printer". If you are only pairing 1 printer with your Oddle Register (even if it is for the kitchen only), please connect its IP Address under "Setup Thermal Printer" for auto-printing to work.

💭 Have more questions? Contact our support team at [email protected] or chat with us by clicking on the speech bubble at the bottom-right corner of the page.